Specification:Item Type: Chain Saw ConverterMaterial: Aluminum + IronColor: As shown in the pictureSpecification: 11.5in Plate Size: Approx. 34.4x6cm / 13.5x2.4inApplication: Chain Saw ConverterSeries: Accessories for Angle grinderWeight: Approx.1090g/38.4ozInstallation:1. Check whether the chain saw converter equipment accessories are complete.2. First place the safety anti-skid (the anti-skid must be placed on the 100 angle grinder).3. Pre-installed 8x20 screws.4. Remember to tighten the fixing bracket to make the fixing bracket tight.5. Install the sprocket and fasten the fixed wheel.6. Tighten the pressure plate of the angle grinder (to prevent hanging chains).7. Place the adjusting screw M5x38.8. Place the chain of the plate to align the adjustment hole of the plate and the direction of the chain.9. Place the protective guard.10. Place the baffle and install 8x25 screws.11. Tighten the fixing screws with a hex wrench.Package List:1 x Chain1 x Plate1 x Handle1 x Baffle1 x Bag of Accessories(14pcs)1 x Fixed Plate1 x CaseNote:1. When using the observation chain for the first time, adjust the chain again after about 3 minutes of work to make the chain tension fully open.2. Please wear goggles and safety gloves during operation.